BXGRW - PVC SOLVENT CEMENT
- MSDS: BXGRW
- Manufacturer: NIBCO INC
- Product Name: PVC SOLVENT CEMENT
- National Stock Number: 8040-00N059285
Product Identification
Product ID:PVC SOLVENT CEMENT
MSDS Date:04/01/1990
FSC:8040
NIIN:00N059285
MSDS Number: BXGRW
Responsible Party
LOUISVILLE, KY 40211-1351
US
Emergency Phone: 303-823-5718
Info Phone: 303-823-5718
Cage: 61623
Contractor
Telephone: 303-623-5716
Cage: 61623
Ingredients
5F,
CAS: 109-99-9
RTECS: LU5950000
Fraction By Weight: 50-80%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM/250STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ACETONE (SARA 313) (CERCLA)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 10-15%
OSHA PEL 1000 PPM
ACGIH TLV: 750PPM/1000STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
PVC RESIN
Fraction By Weight: 10-14%
OSHA PEL N/K
ACGIH TLV: N/K
CYCLOHEXANONE (CERCLA)
CAS: 108-94-1
RTECS: GW1050000
Fraction By Weight: 5-14%
OSHA PEL 50 PPM, S
ACGIH TLV: 25 PPM, S
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
FUMED SILICA
CAS: 68583-49-3
Fraction By Weight: 2-3%
OSHA PEL N/K
ACGIH TLV: N/K
2-BUTANONE (MEK) (SARA 313) (CERCLA)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: <1%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM/300STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: <1%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
Fire Fighting
Flash Point Method:TOC
Flash Point:5F,-15C
Lower Limits:1.8%
Upper Limits:11.8%
Extinguishing Media:FOR SML FIRES USE DRY CHEM, CO*2, WATER/FOAM
EXTINGUISHER. FOR LGE FIRES EVACUATE AREA & CALL FIRE DEPARTMENT
IMMED.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FIRE HAZARD BECAUSE OF LOW FLASH POINT
AND HIGH VOLATILITY. VAPORS ARE HEAVIER THAN AIR AND MAY TRAVEL TO
SOURCE OF IGNITION.
Exposure Controls
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:151F,66C
Vapor Pres:145 @ 20C
Vapor Density:2.5
Spec Gravity:0.94
Evaporation Rate & Reference:5.5-6 (BUTYL ACETATE=1)
Solubility in Water:SOLVENTS (SUP DAT)
Appearance and Odor:GRAY LIQUID WITH ETHER-LIKE ODOR
Percent Volatiles by Volume:85
Stability
Stability Indicator/Materials to Avoid:YES
CAUSTICS, AMMONIA, INORGANIC ACIDS, CHLORINATED COMPOUNDS, STRONG
OXIDIZERS AND ISOCYANATES.
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS, OPEN FLAME &
OTHER SOURCES OF IGNIT. ALL HNDLG EQUIP SHOULD BE ELECTRICALLY
GROUNDED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.